USA Based Power Generate Company Seeking Investors

Opportunity Summary

Project I:

NANOTECH ENERGY INC. – Nevada, USA.

Dr.Rajan Sharma (Chairman) Doc. in Business Management

CAPACITORS PROJECT

We are Indian based company engaged in Energy efficiency products, jointly incorporated new company in USA with Japanese partners, to manufacture, Carbon based Linear capacitor which is a small device that is able to accumulate a lot of electricity instantly with a rapid charge of 20 minutes.

 

This capacitor can be used for electric airplane, electric boat, electric agricultural equipment, construction equipment and others.The small capacitor can be installed in a personal computer, cell phone, or other household electric appliances also. We can use this to other electric appliances including lamps.

 

Providing electricity for household: By using the dynamo with linear system together, which can be used for semi-permanently, we can provide electricity to household. This system is cheaper than solar or wind power. Also it doesn't need sun light or wind. This system is portable and small.

 

 

By using both capacitor and new generator, cars or motorcycles do not need fuel and will be able to drive for semi-permanently. Compared to other products, recharge time is much shorter, and since these devices are smaller, the body weight of vehicles will be light.

 

Recharge time will be shortened for a personal computer or a cellar phone, and other electric appliances when both battery and generator are installed.

LED PROJECT

Technological Advantage

Basically, two kinds, 350mA and 500mA, are used.

LED (light emission diode) uses less electricity and emits lights.

Benefits of high power LED lights are high brightness and electricity-saving power.

○Operation Advantage

Due to its electricity-saving and compact size, it costs less for construction.

It is maintenance free (members 5 years warranty) excepts cleaning.

○Use Application Advantage

Use of LED makes it possible to operate in a bad locations and in warm and cold

areas.It can be installed in along rivers and by the coastal regions.

Since independent power switch, it can be used as illuminant during disasters.

Solar systems can be designed and manufactured.

○Technological Challenges

Since high power LED lights emit heat, it is necessary to build heat emission

disposal. Thus, it urges to research about materials and structures to solve the heating problems. As the current research result, 70% of the structure is estimated to have solved, and the testing material is also almost done.

CARBON PROJECT

Solve environmental disruption due to waste tires

Carbonize tires and other wastes, and use them effectively as recycled materials

Sell byproduct of recycling business

1. Use carbon and oil from tire recycling process

2. Sell these byproducts to tire manufacturers and provide a tire recycling business model

3. Sell these byproducts to oil manufacturers as supply of petroleum products

4. Sell petroleum products to oil consumers (Agriculture, fishing, fish farming)

Provide materials to Carbon businesses with low price

 

Investment Details

Investment Required           :           150 Million USD.

Initial Requirement              :              80 Million USD.

ROI                                         :                3 Years

Market                                    :           Worldwide

Potential Market                   :           300Billion USD, in 3 years of production.

 

Project II:

OTC SDE WAVE ENERGY CORPORATION

Dr.Rajan Sharma (Mg. Dir) Doc. in Business Management

 

We are Indian based company engaged in Energy efficiency products, jointly incorporated new company in India to produce 100MW of electricity from sea wave. We have applied to the state of Puducherry, India and we have been issued Letter of Intend to produce electricity from Puducherry power corporation ltd. Under negotiations with various state Govt to produce electricity under BOOT basis.

Project details:

 

A buoyant metal plate is attached at one side to a concrete seawall. Waves press the plate up (in a cantilever action) and drive a hydraulic ram. The hydraulic system is connected to a hydroelectric system.

 

The system takes advantage of the wave's speed, height, depth, rise and fall, and the flow beneath the approaching wave, thus producing energy more efficiently and cheaper than both other sea-wave and conventional technologies which require vast amounts of land space. The system has a potential to produce a net of 38kWh per meter of beachfront occupied.

 

•         The system creates pressurization of ocean water, which in turn causes pressure on hydraulic oil.  This activates a hydraulic motor, which produces electricity.

 

 

 

 

The uniqueness of the method:

Ø      The process collects energy, not only from the visible surface waves, but also from power below the surface, inherent in ocean waves. The power harnessed from below the surface is far greater than which could be harnessed from the surface wave alone.

Ø      Constant production of electricity (despite the inconsistent nature of the sea.

Ø      Basic and robust technology with few moving parts consisting mainly of standard hydraulic and electrical equipment.

Ø      Only about 10% of the system components are located in the seawater. 

Environmentally friendly

•         The system produces clean energy without detrimental effects on the environment.

Cost Effective

•         Manufacturing cost for a 1MW system is around $650,000 USD and production cost is less than 1 cent per kW.

•         Low maintenance and low operating costs.

•         Relatively short construction time.

Efficiency

•         The system is much more efficient than any other method known to date.

•         The system operates even when there are no waves.

Durability

•         The system is enclosed in concrete, thereby neutralizing environmental influences (e.g. storms).

•         No corrosion.

 

Investment Details

Investment Required           :           30 Million USD.

Initial Requirement              :           10 Million USD.

ROI                                         :           3 Years after production.

Market                                    :           Seashore States.

Potential Market                   :           300 Million USD, in 3 years of production.

 

Project III

The Planet-7 International.

Dr.Rajan Sharma (CEO) Doc. in Business Management

 

 

We are Puducherry based company certified by, NSIC – CRISIL as SE2B { Highest performance & moderate financial strength company } engaged in Energy efficiency products like E-Bike, Solar Bike & mobility scooters for physically challenged persons.

 

We the first Indian company to introduce the E-bike’s in India in the year 2001 and first to manufacture the same in India.

 

Again we are introducing Hybrid Scooters, which runs on both gasoline and battery with a combines mileage of 450++ kms / per litre gasoline. The scooters will be available from INR. 40,000 / Unit.

 

Investment Details

Investment Required           :           20 Million USD.

Initial Requirement              :           7.5 Million USD.

ROI                                         :           15 Months

Market                                    :           Worldwide

Potential Market                   :           100 Million USD, in 2 years of production.